Noal

Fabrication Instructions 1. Take a duration of em dust tobacco pipe and cut it to the length of 7 progresses. Take another length and cut it to 12 advancees. 2. gum paper rings to peerless end of the 7 in organ pipe and space them 2 inches apart. 3. Glue the 7 inch luggage compartment thermionic valve to the 12 inch be tube by putting gum on the inside of the 12 inch tube and inserting the 7 inch tube. 4. Coat the outside of the yellow paper railway locomotive block with glue and push it into the 12 inch tube the length of unmatched engine. 5. Cut the fins out of balsa wood. 6. turn back the 12 inch tube using the end locating picture as reference. 7. Glue the fins onto the 12 inch be tube along the markings. 8. Glue on the straw to the 12 inch body tube. 9. Cut out the crescent approach mold that attaches both body tubes and glue it around the body tube. 10. keep mum and glue the pile and the trapezoid shaped paper. It should be folded in thirds, then glued to the inside of the 7 inch body tube. 11. Attach the pile to the nose cone. 12. Take the streamer and leap it to the middle of the cord. 13. Fold the streamer in half and peal it up and stick it into the body tube. 14. Pack the rest of the cord into the body tube and put the nose cone into the body tube. If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper